A little of this and a little of that....

It has been too long since I made any update to this blog and unfortunately even longer since we have made a trip anywhere.  That's not to say I haven't been flying!  The annual inspection went well.  Nothing major was found and everything appeared to be in good working order.  The only two big items that were accomplished were the spark plugs were changed out and the universal joints on the control yoke shafts were replaced.  Both items were due to wear and I was able to plan and budget for them.  I will say the plane "feels" much better with the new universal joints.

Anyway, I try to fly at least once a week to keep the plane exercised.  I always try to find something to do with each flight to explore, play with, fiddle, or whatever to give it a little more purpose.  For instance, I found out the automatic gear extension system in the plane does work!  I tried it when I first bought it, but no joy.  During the annual I stopped by the shop after they did the gear swing checks and they told me everything was good including the automatic system.  It is?  Sure enough! I tried it out and down they dropped.  I guess I'll have to adjust my routine and checklist to disengage the override during descent & landing.  Hey, you never know!

So here are a few pictures to share of my recent wanderings:

Yeah......they were worn out.

Came in to get an update and found this pretty gal getting some TLC too!

This Lockheed 12A is owned locally by the Marco family.  They have some amazing planes in their collection.  I've also seen their De Havilland Beaver and P-51 Mustang.  You can read more about the family and their planes here:  Generations In Aviation  I need to find out if they give tours!  Anyway, I came out the next day and I briefly met David Marco during the post maintenance checks.  Watching and listening to her start-up was awesome!

And I thought polishing the spinner on my plane was laborious!  This gal really shines!

I really like the iPad mini on the yoke with ADS-B weather from the Stratus 2 receiver.  I played with it a lot and felt very comfortable about cancelling my XM Weather subscription.  Here you can see what was received on the iPad and what it looked like out the window.

Every once in a while, I'd chase little areas of rain to rinse off the plane.  Sometimes I'd even drop the landing gear to give them a good rinse too!  I'm lazy at times, but with the heat indexes well over 100 degrees this summer, I'm waiting for cooler weather to give the plane a proper bath.

Climbed up to cooler air one afternoon and found a few sprinkles.  Saw this rainbow behind me after I went through.  It went around a lot further than the picture could capture.

That's about it.  Unfortunately our next scheduled Family Flying adventure is a little ways off.  We are looking forward to visiting family in Arkansas and Texas over Christmas and New Years.

But.......before that is the next Bahamas Habitat Fly In to Serve Others event and I'm blessed to be able to go!  It will be from October 23 -26.  If you are interested in experiencing this journey too, please contact the Bahamas Habitat and find out how!

2012 Annual Inspection - Back In The Air!!!

I got a call after work yesterday from Northeast Aircraft Maintenance that our plane was all buttoned up and ready to fly. After working early this morning, I got to the airport around 9 am and started my post-annual and very through pre-flight inspection. Everything looked great so I waited a bit till the overcast layer burned off to go fly.  It has been about 2 1/2 weeks since the inspection started, but a lot of that time was eaten up with down time awaiting parts. Overall the inspection went very well and we got a few things done to help 4RM continue to safely take us on our various travels!

The biggest job that was accomplished this year was dealing with corrosion on the belly. The paint was stripped around the affected areas and the corrosion was cleaned off. Luckily it was just a bad case of surface corrosion at this point, but if left unfixed it would have turned into a much worse situation. After the areas were cleaned, they were treated with alodine, primed and painted. It looks much better!  I already shared the before photos so here of some while the work was in progress and upon completion.

The new left stabilator tip turned out great and we touched up the leading edge of the stabilator on that side as well since we were already painting in that area anyway.

We also noted that although my main gear tires were legal, they probably didn't have a lot of landings left in them till they would need replacement.  I decided to replace them now with Desser's Monster Retreads like I had done a few years ago on the Arrow.  They are highly rated by Aviation Consumer and easier on the pocketbook than a lot of other options.  I also like them because they come with some nice deep treads.  A lot of folks get concerned about using retreads and having fit issues especially with retractable gear planes.  I didn't have any problems and they freely fit in the well and spin without interference. 

After the clouds cleared, I started up, taxied out for my run-up, and took off in to the pattern to check systems before proceeding any further from the airport.  With everything looking good I advanced the settings to full power and climbed up to 5,500 feet and headed south towards Flagler County Airport, KXFL for the least expensive fuel around.  The weather was already building to the southwest which gave me an opprotunity to test the repairs to the Strikefinder.  They replaced the AC powered heading input wire and sure enough my Strickfinder display is once again slaved to my heading.  Outstanding!

Upon landing at KXFL I was kindly notified by the ground controller that the self-serve fuel pump was offline.  I needed fuel so I taxied up to the FBO and requested full service fuel since it was my only option.  They topped off the plane and kindly charged me the self serve price.  That's customer service!  I hopped back in the plane and headed north for home.  Within an hour the clouds had gone from what you see above to some rapidly building cells as you see below.  Luckily they were widely  scattered so I cruised home, kept a safe distance, and enjoyed the views!

It was great to be back in the air.  Today's flight made some fresh exhaust stains on the newly painted belly, so I better give my plane a good bath and wax job soon to make sure it stays clean and well protected!



2012 Annual Inspection - The Beginning

I haven't been flying as much as I'd like lately; seems to be a recurring theme. The tropical storms we've had and a few other things have gotten in the way. I have made a few hops here and there, took some friends flying for the first time, but no real "adventures" to write about yet. I have a whole love-hate relationship with the annual inspection. As an aircraft owner I love it because the plane gets a thorough check-up, I get to know my plane more and more, things that need to be fixed get fixed if they haven't been discovered during the last year of flying, and upon it's completion I get renewed confidence in the plane that flies my family around for our amazing trips. The hate part really goes without saying, but its money. The inspection itself is 2+ full days of labor which of corse you then add the various repairs and so forth, and things really start to add up! At least the shop I use allows owner assisted annuals. That basically means they allow me to get in the way, ask stupid questions, and slow down some progress, but I get to remove access panels, seats, and clean the plane instead of someone else doing it. So I try to tell myself that saves me a little money.

Anyway, I took off early yesterday morning for a nice flight along the beach and returned in time for the shop to open up. That way everything was nice and warm for the oil change and compression checks. Both items checked great! We'll get the oil analysis back soon to make sure. So I spent the morning opening panels and removing things till I had to leave for work.

I made it back to the shop at the end of the day to see how things were going. Overall not too bad. A few leaks here and there that we'll fix, the throttle linkage is loose, but the main area of concern is the corrosion on the belly of the plane. Corrosion on a plane can be a huge concern. Luckily for me it is just surface corrosion. We actually noted this area last year and I elected to defer it till now as I have been careful to keep the belly washed and cleaned as well as the plane is hangared. We agreed to deal with it this year so it doesn't get worse and cause any really big issues. It is an easy fix, but a little labor intensive which just means more money! Oh well, at least it will be fixed, fixed right, and I'll have peace of mind which is the most important thing.

Since we'll be happily cleaning up, prepping, and repainting part of the belly blue, we decided to go ahead and fix the nick on the left fiberglass wingtip as well as the cracked left stabilator tip. The current stabilator tips are plastic so they can’t be repaired. Some of the cracks had been drill-stopped before, but it is getting worse and it needs to be replaced. I decided to order a new one made of fiberglass. Luckily I found a pair of brand new fiberglass tips on eBay for the price of one direct from the various manufacturers. Every little bit helps!

So we'll see how next week goes and hopefully we'll be back in the air soon, with a healthy bird ready for another year!